Breakdown of our telephone system    

Our telephone system broke down and we are currently not available by phone. In urgent cases please write an email to your contact person or to info@werner-dosiertechnik.de.

Foot bath sputtering system for 1 basin

Foot bath sputtering system

The programme is activated by a push-button. The guest has the choice between a cold or warm water treatment. After pressing the button the filling of the basin starts. It stops when an adjustable water level is reached. Then the bubbling starts automatically for a programmable time. After the lapse of this time the bubbling stops and a dwell time follows. Afterwards the basin is emptied automatically. During the dwell time the bubbling can be restarted before the emptying. During the filling procedure a chlorine solution is dosed to disinfect the whole system (drain-, air piping and basin) and the feet of the user. 

Foot bath sputtering system for 1 basin

Technical Data

CONTROLLER  
Electrical supply 230 V/AC 50 Hz  
Power supply max. 300 W 
Measures W 35 cm x H 35 cm x D 15 cm 
Weight 2 kg 
 
WATER PART  
Water supply 2 x 3/4" IG  
Outlet to the basin 2 x solenoid valve 3/4"  
Measures W 41 cm x H 44 cm x D 15 cm 
Weight 8 kg 
Water consumption according to basin dimensions!  

Scope of delivery

Controller consisting of:

  • Micro processor controller in housing
  • Potis for the adjustment of the single parameters (Sputtering time, dwell time...)
  • Pressure switch and pressure measuring device for the regulation of the water level
  • Completely pre-wired on PP board grey

Water part consisting of:

  • 2 x supply (warm/ cold) with pre-filter and ball valve 3/4" female thread
  • Thermo mixer JRG 3/4" with non-return valves
  • 2 x outlet with solenoid valve 3/4" and screwing for the filling
  • Completely tubed and pre-wired on PP board blue

Push button plate 2 fold with bonnet for flush mounting and name plates for the start of the programme.

Peristaltic pump with console and bottle 1,5 l for the disinfection incl. dosing tube and dosing valve

DD-0-Compact mit Konsole_ret

Side channel vacuum blower, 0.20kW 230 V - 50 HZ, IP55 for sputtering effect

Seitekanal-frei

Motor-ball valve 2-ways PVC DN32 PTFE/EPM 230 VAC D40 S6 max. 3,5 bar for the automatical drainage of the basin

MotorKG-frei

To be provided by the builder

  • Plants room for the installation of the control panels
  • Power socket 230 V
  • Water connection cold 3/4"
  • Water connection warm 3/4"
  • Needed pressure: 3 bar dynamic
  • Water quantity: according to basin dimensions
  • Tubing to water outlet DN20
  • Drainage tube DN40
  • Air tube DN25
  • Basin with false floor

Accessories/ Options

  • LED illumination for the basin
  • Basin with false floor made of ceramics or Corian on demand