Breakdown of our telephone system
Unfortunately our telephone system broke down and we are currently not available by phone. We work with high pressure on a solution.
In urgent cases please write an email to your contact person or to info@werner-dosiertechnik.de.
Breakdown of our telephone system
Our telephone system broke down and we are currently not available by phone. In urgent cases please write an email to your contact person or to info@werner-dosiertechnik.de.
The controller controls the complete treatment of a „Healing Clay Steam Bath” and all necessary components: Steam generator, exhaust fan, aroma pump, illumination, solenoid valve for shower function and sound. The treatment is structured into three time steps:
Treatment time: The programme is activated by the start push-button on the outside of the cabinet. Then the room light is switched-off and the effect light (e.g. fiber optics or LED RGB illumination for light therapy) is switched-on. During this time the healing clay treatment (scrubbing and drying) is done.
Steam time: Afterwards the steam generator is activated and starts to produce steam on full power. The cabinet is filled with steam and the dry healing clay on the body gets wet.
Shower time: The illumination changes to red. A warm drizzle rain sprays on each guest from nozzles above the seats. This procedure is necessary for the pre-cleaning. The treatment stops after the shower. The effect light is switched-off, the room light and the exhaust fan are switched-on. The controller is ready for a re-start.
There is the possibility to operate the controller only on steam room operation. In this operation mode the controller controls the cabinet like a normal steam room with steam production, exhaust fan and aroma dosing.
Electrical supply | 230 V/AC 50 Hz |
Power supply | 500 W |
Control contact / -output for steam generator | non-volt contact |
Measures | W 50 cm x H 50 cm x D 20 cm |
Weight | app. 7,5 kg |
WATER PART 1/2" for up to 3 seats/ nozzles | |
Water supply | 2 x 1/2" female thread |
Outlet | 1 x solenoid valve 1/2" |
Measures/ Weight | W 20 cm x H 60 cm x D 13cm / 5 kg |
WATER PART 3/4" for up to 6 seats/ nozzles | |
Water supply | 2 x 3/4" female thread |
Outlet | 1 x solenoid valve 3/4" |
Measures/ Weight | W 25 cm x H 65 cm x D 15 cm/ 6 kg |
WATER PART 1" for up to 12 seats/ nozzles | |
Water supply | 2 x 1" female thread |
Outlet | 2 x solenoid valve 3/4" |
Measures/ Weight | W 30 cm x H 70 cm x D 18 cm/ 7,5 kg |
A complete package for a "Healing Clay Steam Bath" consists of the following components:
Micro processor controller in housing:
Water part:
Photo: Water part 1/2" for up to 3 nozzles:
The dimensioning of the supplies of the water part and the number of solenoid valves complies with the numer of seats/ nozzles in the cabinet!
To be ordered seperately: