Metering of the powder from a big bag into a suspension unit from where the suspension is directly conveyed either to the filter or to a suspension tank for further distribution.
| Dosing rate: | 2-200 kg/h |
| Platform: | 2 x 4 m |
| Weight: | approx. 400 kg |
| Max. service pressure: | 0.5-1.5 bar |
| Electrical supply: | 400 VAC 16 Amp. |
| Water supply: | 4 bar, approx. 2-4 m3/h - depending on performance |
Dosing unit for dry activated carbon powder to eliminate organic impurities from water. Metering of the powder directly onto the filter.
Dosing rates of up to 5 kg/h. For circulation rates of up to 2000 m3/h. Low cost dosing of dry powdered activated carbon directly from the delivery drum.
| Max. dosing rate: | 5000 g/h |
| Max. pressure of system: | 2 bar |
| Booster pump: | 0.45 kw, 1500 l/h at 3 bar |
Dosing unit for dry activated carbon powder to eliminate organic impurities from water, especially useful as "standby" equipment for the purification of drinking water.
The PAKDOS 60/30 fills a buffer tank with 2% suspension within approx. 1/2 hour. Then a new drum may be put on the machine. When the buffer tank is empty, the PAKDOS system automatically starts refilling the tank.
| Max. dosing rate: | 30 kg/h |
| Max. pressure of system: | 2 bar |
| Booster pump: | 0.45 kw, 1500 l/h at 3 bar |
Coating system for Diatomite Filters from Systems-Flexcontainer.
Dustless handling of the diatomite from a Flexcontainer to coat diatomite filters.
The metering device for the diatomite is connected to the slide valve of the container. The desired amount of diatomite is selected on the control panel. With the start of the coating procedure, the water or the fluid to be filtered flows through the suspension tank. It is then mixed with the diatomite metered from the container and conveyed to the filter by a pump.
| Dosing rate: | 300 kg/h or 10-300 kg/batch |
| Dimensions of container: | 120x120x220 cm (other dimensions are possible) |
| Filling weight: | approx. 500 kg |
| Base with container: | 1.5 x 2 m |
| Max. counter pressure: | 1.5 bar |
| Electrics: | 230 VAC, 0.75 kW |
| Water supply from pipe network: | 3 m3/h by 3.5 bar |
Metering unit for Diatomite Filters from Systems-Flexcontainer without coating.
Dustless handling of the diatomite from a System-Flexcontainer to coat diatomite filters.
The metering unit for the diatomite is docked to the plate slide of the container. The desired amount of diatomite is selected and the diatomite is metered to the suspension tank or any other container.
| Dosing rate: | max. 300 kg/h |
| Container measures: | 120x120x220 cm (other dimensions are possible) |
| Filling weight: | approx. 500 kg |
| Base with container: | 1.5 x 2 m |
Dosing units for the Dosing of Calcium Hypochlorite for Disinfection.
Drinking water, cooling water, wastewater and waste gases.
The chlorine granulate is dosed directly from the container to the dissolving unit. It is completely dissolved there without deposits and then conveyed to the dosing point by a venturi metering system.
Data
| Dosing performance: | chlorine: approx. 2 kg/h(GR100 4 kg/h) acid: approx. 3 kg/h |
| Dimensions: | w60 x d70 x h150 cm |
| Weight: | approx. 50 kg |
| Electrical supply: | 230 VAC single phase, 0.3 kW |
| Supply pressure: | 0.2-1.5 bar |
| Counter pressure: | 0-1.5 bar depending on supply pressure |
| Water flow: | with booster pump approx. 1000 l/h at 1.2 bar |
Dosing system to produce a detergent solution of defined concentration.
1 powdered and 2 liquid highly concentrated detergent chemicals are metered from the containers to a dissolving canister containing 2 liters of water. The powder, chemicals and water are then mixed into a detergent solution of a defined concentration. The prepared solution is released to a storage tub. This is always kept full in order to have a buffer for short term increase in the consumption of solution.
Data
Dosing performance:
| Powder: | approx. 5 kg/h |
| Liquid chemicals: | approx. 4 l/h |
| Solution: | 120 l/h |
| Storage tank: | approx. 20 l (Option 40 l) |
| Base dimensions: | w150 x d70 x h145 cm together with the liquid containers |
| Weight: | approx. 50 kg |
| Electrical supply: | 230 VAC single phase, 0.13kw |
| Supply water pressure: | minimum 2 bar |
Dissolving system for granular chemicals to be dosed directly from the chemical drum.
The chemical is dosed to the dissolving system from where the solution is then conveyed to the injection point by any adequate metering system.
Data
| Dosing performance: | max. 30 kg/h depending on the solubility and requirements |
| Dimensions: | w60 x d70 x h160 cm |
| Weight: | approx. 50 kg |
| Electrical supply: | 230 VAC single phase, 50 W (24 VDC on demand) |
| Supply pressure: | 0.6-1.5 bar |
| Solution capacity: | 200-400 l/h at 1 bar |
Dissolving system for granular chemicals to be dosed directly from the chemical container.
Easy or hard to dissolve chemicals are dosed to the dissolving system to prepare a chemical solution that is conveyed to the injection point by any appropriate metering system such as a dosing pump, venturi, centrifugal pump etc.
Container-system GR150 for all GRANUDOS-types with drum provision
Storage container
Transferring unit
Lifter
